Low price high strength SBM high electrostatic separators :Magnetic separation is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20, 000 gauss; The rare earth magnetic separators are relatively inexpensive and can produce magnetic fields around 6, 000 gauss. To different kinds of mineral ores, the application of magnetic separation machine is quite different.
Low price high strength SBM high electrostatic separators features:1. High intensity. High garden, high power rare earth magnets
2. Available with flanges to suit square and round chutes
3. Available with angle deflectors above and between the tubes for heavy contamination
4. Direct access to magnets in chute
5. Easily installed and extremely easy to clean
Models and sizesThe range of wet magnetic separators is composed of the series WS1200 with drum diameters of 1200 mm with a magnetically effective drum length up to 3678 mm in increments of 613 mm. The WS1200 series includes concurrent, counter-current and counterrotation tank designs.
The wet magnetic separators are primarily used for cobbing, roughing, cleaning and finishing purposes.
Concurrent and counter-current separators are designed for both single and multistage arrangements.
Low price high strength SBM high electrostatic separators in indonesia application:
Magnetic separator is mainly used in wet separating of the fine minerals with strong ferromagnetism. The wet-type drum permanent magnetic separator is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, and limonite and so on.
Magnetic drum assembly
Magnetic separations
The heart of the magnetic separator is the magnetic drum assembly which is composed of a stationary magnetic array mounted inside of a non-magnetic drum. During operation, the drum revolves around the magnetic assembly thereby transporting magnetically attracted material on the drum to the area designated for discharge.
The drum heads are normally cast from nonmagnetic aluminium alloy and the drum shell is manufactured from non-magnetic stainless steel. Drum shells are normally rubber or stainless steel covered against abrasion.
Magnetic systems
The magnetic system has alternating polarity and is comprised of six main poles and intermediate cross poles for maximising the magnetic flux. Other systems for special applications are also avalable
Low price high strength SBM high electrostatic separators technical data: |
| Model | Roller size | Magnetic intensity on surface mT | Processing ability | Drive power | Roller rotary speed | Weight |
| (Dia.×Length) |
| mm | Geometric center | average | highest | T/h | m3/h | Kw | Kg |
| CTS(N,B)-46 | 400×600 | | 130 | 160 | 1~3 | 5 | 1.1 | 45 | 600 |
| CTS(N,B)-66 | 600×600 | | 145 | 170 | 5~10 | 16 | 1.1 | 40 | 750 |
| CTS(N,B)-69 | 600×900 | | 145 | 170 | 8~15 | 24 | 1.1 | 40 | 830 |
| CTS(N,B)-612 | 600×1200 | | 145 | 170 | 10~20 | 32 | 2.2 | 40 | 990 |
| CTS(N,B)-618 | 600×1800 | | 145 | 170 | 15~30 | 48 | 2.2 | 40 | 1330 |
| CTS(N,B)-712 | 750×1200 | 120 | 155 | 180 | 15~30 | 48 | 3 | 35 | 1500 |
| CTS(N,B)-718 | 750×1800 | 120 | 155 | 180 | 20~45 | 72 | 3 | 35 | 2100 |
| CTS(N,B)-918 | 900×1800 | 148 | 165 | 190 | 25~55 | 90 | 4 | 28 | 2900 |
| CTS(N,B)-924 | 900×2400 | 148 | 165 | 190 | 35~70 | 110 | 4 | 28 | 3500 |
| CTS(N,B)-1018 | 1050×1800 | 148 | 165 | 190 | 40~75 | 120 | 5.5 | 22 | 4000 |
| CTS(N,B)-1021 | 1050×2100 | 148 | 165 | 190 | 45~88 | 140 | 5.5 | 22 | 4500 |
| CTS(N,B)-1021 | 1050×2100 | 160 | 240 | 280 | 45~88 | 140 | 5.5 | 22 | 4500 |
| CTS(N,B)-1024 | 1050×2400 | 148 | 165 | 190 | 52~100 | 160 | 5.5 | 22 | 5000 |
| CTS(N,B)-1024 | 1050×2400 | 160 | 240 | 280 | 52~100 | 160 | 5.5 | 22 | 5000 |
| CTS(N,B)-1030 | 1050×3000 | 160 | 240 | 280 | 65~125 | 200 | 7.5 | 22 | 6200 |
| CTS(N,B)-1218 | 1200×1800 | 148 | 165 | 190 | 47~90 | 140 | 5.5 | 19 | 5800 |
| CTS(N,B)-1218 | 1200×1800 | 160 | 240 | 280 | 47~90 | 140 | 5.5 | 19 | 5800 |
| CTS(N,B)-1224 | 1200×2400 | 148 | 165 | 190 | 82~120 | 192 | 7.5 | 19 | 6200 |
| CTS(N,B)-1224 | 1200×2400 | 160 | 240 | 300 | 82~120 | 192 | 7.5 | 19 | 6200 |
| CTS(N,B)-1230 | 1200×3000 | 148 | 165 | 190 | 80~150 | 240 | 7.5 | 19 | 7200 |
| CTS(N,B)-1230 | 1200×3000 | 160 | 240 | 280 | 80~150 | 240 | 7.5 | 19 | 7200 |
| CTS(N,B)-1530 | 1500×3000 | 180 | 240 | 300 | 90~170 | 270 | 11 | 14 | 8100 |
| CTS(N,B)-1540 | 1500×4000 | 180 | 240 | 300 | 115~220 | 350 | 11 | 14 | 9300 |
ABOUT USSHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.
Inquiry ServicePlease fill in your need products and your message and do not forget mail and/or phone if you like to be contacted.
We are the professional machine manufacturer in China.
I need to ask you some details for sending you the more suitable quotation,
1. What is the raw material do you want to process?
2. What is the capacity per hour do you need?
3.In addition, you have other what requirements?
I hope you can tell me these details, i will give you the best quotation ASAP, thanks. Your satisfaction is our greatest pursuit, we would like to sincerely for your service! We look forward to your inquiry!
